Software Configuration; Basic Information; Change The Id; Date Setting For Timer - HDL Buspro -MSM.431 User Manual

5. Software Configuration

5.1 Basic Information

5.1.1 Change the ID

Every HDL-BUS device has one Subnet ID and one Device ID, the Device ID should be
unique in its subnet and the Subnet ID should be kept consistent with the Gateway
(typically the SB-DN-1IP or HDL-MBUS01IP.431).

5.1.2 Date Setting for Timer

Built-in clock chip, can set Date and Time manually or read it from PC, It broadcasts the
time to system by default.
It supports 'Daylight Saving Time' function, some countries like EU countries, Australia
need to use it then can set the start time and end time here according to different places.

5.1.3 History Log

- Ready history
Enter the start time and end time, so you can view arm, disarm and alarm log during
this time period.
- Clear history
When enter the password, you can clear the unneeded arm, disarm and alarm log, the
default password is 85521566.
- New password
When enter the password, you can customize the new password for safety.
Advanced Security Controller – User Manual
User Manual
SB-DN-SEC250K
6