Maintenance Schedule; Maintenance Checklist - Ventrac MK960 Operator's Manual & Parts Drawings

Maintenance Schedule

Maintenance
Schedule
Caster Wheel Pivot
Wheel Axle Bearing
Spindle
Hitch Arm Pivot
Jackshaft Bearing
Rear Roller Bearing
Rear Rocker Pivot
Hydraulic Flip-up Cylinder Ends
Flip-up Rocker Bracket
Inspect for Loose, Missing, or Worn Components
Inspect belts and pulleys
Inspect Mower Blades and Blade Retaining
Bolts. Torque to 75-80 ft-lbs (102-108 Nm)
Check Tire Pressure - 8-10 psi (55-69 kPa)
Check Hitch Pivot Bolts.
Torque to 151 ft-lbs (205 Nm)
Inspect Safety Decals
** Operation in severe conditions may require more frequent service intervals.
^ Grease Until Fresh Grease is visible

Maintenance Checklist

Maintenance
Checklist
Wheel Swivel Bearing
Wheel Axle Bearing
Spindle
Hitch Arm Pivot
Jackshaft Bearing
Rear Roller Bearing
Rear Rocker Pivot
Hydraulic Flip-up Cylinder Ends
Flip-up Rocker Bracket
Inspect for Loose, Missing, or Worn Components
Inspect belts and pulleys
Inspect Mower Blades and Blade Retaining
Bolts. Torque to 75-80 ft-lbs (102-108 Nm)
Check Tire Pressure - 8-10 psi (55-69 kPa)
Check Hitch Pivot Bolts.
Torque to 151 ft-lbs (205 Nm)
Inspect Safety Decals
** Operation in severe conditions may require more frequent service intervals.
^ Grease Until Fresh Grease is visible
SERVICE
Grease & Lubrication: See Lubrication Section
2 1
                   
2 ^ **
                   
5 3
                   
2 ^
                   
2 1
                   
2 1
                   
2 ^
                   
2 ^
                   
1 ^
                   




 

Grease & Lubrication: See Lubrication Section
2 1
2 ^ **
5 3
2 ^
2 1
2 1
2 ^
2 ^
1 ^
Inspection
  
Inspection
Service - 24
    