Maintenance Schedule; Maintenance Checklist - Ventrac LM600 Operator Manual & Illustrated Parts List

Maintenance Schedule

Maintenance Schedule
Caster Wheel Pivot
Wheel Axle Bearing
Rear Roller Bearing
Spindle
Deck Slide
Inspect for Loose, Missing, or Worn
Components.
Inspect Belts, Pulleys, Blades, and Blade
Retaining Bolts
Check Tire Pressure, If Applicable
Check Hitch Pivot Bolts. Torque to 75 ft lbs
** Operation in severe conditions may require more frequent service intervals.
^ Grease until fresh grease is visible.
% Clean and relubricate with a thin film of grease

Maintenance Checklist

Maintenance Checklist
Wheel Swivel Bearing
Wheel Axle Bearing
Rear Roller Bearing
Spindle
Deck Slide
Inspect for Loose, Missing, or Worn
Components.
Inspect Belts, Pulleys, Blades, and Blade
Retaining Bolts
Check Tire Pressure, If Applicable
Check Hitch Pivot Bolts. Torque to 75 ft lbs
** Operation in severe conditions may require more frequent service intervals.
^ Grease until fresh grease is visible.
% Clean and relubricate with a thin film of grease
LM520 & LM600
Grease & Lubrication: See Lubrication Section Grease & Lubrication: See Lubrication Section
2 1
                   
**
2 ^
                   
2 1                    
3 3
                   
4 % **
                   



 
LM520 & LM600
Grease & Lubrication: See Lubrication Section Grease & Lubrication: See Lubrication Section
2 1
2 ^ **
2 1
3 3
4 % **
SERVICE
Inspection
  
Inspection
Service - 22
    