Table of Contents
Advertisement
Accessories
Product Description
The MK960 mower is designed for the sole purpose of finish mowing. A high strength steel mower deck
and an all steel carrier frame combine to provide long lasting service. The MK960 features a full length rear
roller for even cutting and grass striping.
The MK960 features a 95 inch (241 cm) cutting width and seventeen cutting positions ranging from 1 inch
(25 mm) to 5 inches (127 mm).
The deck can be manually tilted to a near vertical position for cleaning, maintenance, or storage. An optional
hydraulic deck flip up kit uses the power unit hydraulic system to flip the deck up to the vertical position.
Why Do I Need an Operator's Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. Under-
standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
V
enture Products Inc. is pleased to provide you with your new
Ventrac MK960 mower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility as you use your MK960. Please visit our website, or
contact your authorized Ventrac dealer for a complete list of
items available for your new MK960 mower.
Item Description
Hydraulic Deck Flip Up Kit
Flat Free Tire/Wheel Assembly (requires 2 per mower)
High Lift Mower Blades (requires 5 per mower)
Introduction - 5
ber
Part Num
70.8203
53.0148
79.0120
Advertisement
Table of Contents
