Maintenance Schedule; Maintenance Checklist - Ventrac LM600 Operator's Manual & Parts

Maintenance Schedule

Maintenance
Schedule
Caster Wheel Pivot
Wheel Axle Bearing
Rear Roller Bearing
Spindle
Deck Slide
Inspect for Loose, Missing, or Worn
Components.
Inspect Belts, Pulleys, Blades, and Blade
Retaining Bolts
Check Hitch Pivot Bolts. Torque to 75 ft lbs
Inspect Safety Decals
** Operation in severe conditions may require more frequent service intervals.
^ Grease until fresh grease is visible.
% Clean and relubricate with a thin film of grease

Maintenance Checklist

Maintenance
Checklist
Wheel Swivel Bearing
Wheel Axle Bearing
Rear Roller Bearing
Spindle
Deck Slide
Inspect for Loose, Missing, or Worn
Components.
Inspect Belts, Pulleys, Blades, and Blade
Retaining Bolts
Check Hitch Pivot Bolts. Torque to 75 ft lbs
Inspect Safety Decals
** Operation in severe conditions may require more frequent service intervals.
^ Grease until fresh grease is visible.
% Clean and relubricate with a thin film of grease
Grease & Lubrication: See Lubrication Section
2 1                    
**
2 ^
                   
2 1
                   
3 3
                   
4 % **
                   


 

Grease & Lubrication: See Lubrication Section
2 1
**
2 ^
2 1
3 3
4 % **
SERVICE
Inspection
  
Inspection
Service - 21
    