Table of Contents
Advertisement
MAINTENANCE
Lubrication
Grease zerks are located as shown below. Apply 2-3 pumps of grease per spindle
approximately every 50 hours of operation. All others bearings—one pump max! Do not
overgrease. In very dirty, sandy, or wet conditions, more frequent greasing may be
advisable.
Removal and Reinstallation of Mower Blades for Sharpening or
Replacement:
Caution: Blades may be sharp, wear heavy gloves when working with blades.
1. Park tractor on a smooth, level surface.
2. Raise deck to the highest position.
3. Set parking brake, shut the engine off, and remove the key.
4. Remove the 2 latch pins, lift the front of the mower deck to a near vertical position
and reinstall the latch pins into the same holes.
D-1
Hide quick links:
Advertisement
Table of Contents
