How To Read And Use The Manual / Reference Documents; Importance Of The Manual; Manual Maintenance; Consulting The Manual - 3M MATIC A80F Instructions And Parts List

1-INTRODUCTION (continued)
1.2 How to Read and Use the Instruction Manual
This instruction manual covers safety aspects,
handling and transport, storage, unpacking, prepa-
ration, installation, operation, set-up and adjust-
ments, technical and manufacturing specifi cations,
maintenance, troubleshooting, repair work and
servicing, electric diagrams, warranty information,
disposal (ELV), a defi nition of symbols, plus a parts
TM
list of the 3M-Matic a80f Adjustable case sealer
3M Industrial Adhesives and Tapes Division 3M
Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000
(USA) / Edition March 2010 / Copyright 3M 2010
/ All rights reserved The manufacturer reserves
the right to change the product at any time without
notice Publication © 3M 2010 44-0009-2096-5.

1.2.1 Importance of the Manual

The manual is an important part of the machine; all
information contained herein is intended to enable
the equipment to be maintained in perfect condi-
tion and operated safely. Ensure that the manual
is available to all operators of this equipment and
is kept up to date with all subsequent amend-
ments. Should the equipment be sold or disposed
of, please ensure that the manual is passed on.
Electrical and pneumatic diagrams are included in
the manual. Equipment using PLC controls and/or
electronic components will include relevant sche-
matics or programs in the enclosure and in addi-
tion, the relevant documentation will be delivered
separately.
a80f-NA

1.2.2 Manual Maintenance

Keep the manual in a clean and dry place near the
machine. Do not remove, tear, or rewrite parts of the
manual for any reason. Use the manual without dam-
aging it. If the manual has been lost or damaged, ask
your after sale service for a new copy.

1.2.3 Consulting the Manual

The manual is composed of:
- Pages which identify the document and the machine
- Index of the subjects
- Instructions and notes on the machine
- Enclosures, drawings and diagrams
- Spare parts (last section)
All pages and diagrams are numbered. The spare parts
lists are identifi ed by the fi gure identifi cation number.
All the notes on safety measures or
possible dangers are identifi ed by the symbol:
1.2.4 How to Update the Manual in Case of
Modifi cations to the Machine
Modifi cations to the machine are subject to manufac-
turer's internal procedures. The user receives a com-
plete and up-to-date copy of the manual together with
the machine. Afterwards the user may receive pages
or parts of the manual which contain amendments or
improvements made after its fi rst publication. The user
must use them to update this manual.
2
2010 March