Table of Contents
Advertisement
1-INTRODUCTION (continued)
1.2 How to Read and Use the Instruction Manual
This instruction manual covers safety aspects,
handling and transport, storage, unpacking,
preparation, installation, operation, buildup and
adjustments, technical and manufacturing specifi ca-
tions, maintenance, troubleshooting, repair work and
servicing, electric diagrams, warranty information,
disposal (ELV), a defi nition of symbols, plus a parts
list of the 3M-Matic
TM
a80b Adjustable case sealer
3M Industrial Adhesives and Tapes Division 3M
Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000
(USA) / Edition April 2011 / Copyright 3M 2011 / All
rights reserved. The manufacturer reserves the right
to change the product at any time without notice.
Publication © 3M 2011 44-0009-2069-2.
1.2.1 Importance of the Manual
The manual is an important part of the machine; all
information contained herein is intended to enable
the equipment to be maintained in perfect condition
and operated safely. Ensure that the manual is avail-
able to all operators of this equipment and is kept
up to date with all subsequent amendments. Should
the equipment be sold or disposed of, please ensure
that the manual is passed on. Electrical and pneu-
matic diagrams are included in the manual.
Equipment using PLC controls and/or electronic
components will include relevant schematics or
programs in the enclosure and in addition, the
relevant documentation will be delivered separately.
a80b-NA
1.2.2 Manual Maintenance
Keep the manual in a clean and dry place near the
machine. Do not remove, tear, or rewrite parts of
the manual for any reason. Use the manual without
damaging it. If the manual has been lost or
damaged, ask your after-sale service for a new copy.
1.2.3 Consulting the Manual
The manual is composed of:
- Pages which identify the document and the machine
- Index of the subjects
- Instructions and notes on the machine
- Enclosures, drawings and diagrams
- Spare parts (last section)
All pages and diagrams are numbered. The spare
parts lists are identifi ed by the fi gure identifi cation
number. All the notes on safety measures or
possible dangers are identifi ed by the symbol:
1.2.4 How to Update the Manual in Case of
Modifi cations to the Machine
Modifi cations to the machine are subject to
manufacturer's internal procedures. The user
receives a complete and up-to-date copy of the
manual together with the machine. Afterwards
the user may receive pages or parts of the
manual which contain amendments or
improvements made after its fi rst publication.
The user must use them to update this manual.
2
2011 April
Advertisement
Table of Contents
