3M MATIC A80F Instructions And Parts List page 40

11 - SET UP AND ADJUSTMENTS (continued)
Up to
Adjust
Down
to Lock
Air
On/Off
Regulator
Valve
Figure 11-5 – "On/Off" Valve/Regulator/Filter
3 Emergency "Stop" Switch
The two emergency "Stop" switches are mount-
ed for operator convenience, on both sides of
the case sealer. Pushing either of these switch-
es will stop the drive motors/belts and exhaust
air from the fl ap kicker.
To restart machine, rotate emergency stop
switch (release switch latch) and then restart
machine by rotating the Electrical Box on/off
switch.
4 Height Adjustment Crank, Upper
Taping Head
Raises and lowers upper taping head/fl ap
folders to accommodate box height.
5 Width Adjustment Crank
Adjusts distance between side drive belts to
accommodate box width.
6 Indicator, Air Pressure
The optical warning indicator, located on the
upper fl ap folder frame, indicates "Red" when
compressed air circuit is on.
7 Box Kicker Adjustment
Fine Tunes the timing/force of the box kicker.
Figure 11-6 (contact your 3-M Representative
for more information)
a80f-NA
Filter
8 Kicker Paddle Switch
Initializes Kicker process. Kicker swings down
to push box through Taping heads (Figure 11-6
and 11-7).
Figure 11-6
Kicker
Adjustment
Figure 11-7
28
Kicker
Switch
2010 March