Operation; Operator's Correct Working Position; Starting The Machine; Starting Production - 3M MATIC A80F Instructions And Parts List

12-OPERATION

12.1 Operator's Correct Working Position and
Operational Flow (Figure 12-1).
Figure 12-1
Figure 12-1
Once the box has been fi lled, push it between the
side drive belts. Always keep hands in position
(as shown in Figure 12-2).
Figure 12-2
The box will be automatically sealed with adhesive
tape on the top and bottom box seams. Then the
box will be expelled on the exit conveyor.

12.2 Starting the Machine

Important: Before starting the machine, verify that
no tools or other objects are on the con-
veyor bed.
Turn the main rotary switch ON after the
EMERGENCY BUTTON is released (Figure 12-3).

12.3 Starting Production

After having adjusted the machine according to the
box dimensions (height-width), let the machine run
without cartons and check its safety devices. Then
start the working cycle.
12.4 Tape Replacement and Threading
Skill 1 - Operator
See Manual 2: AccuGlide™ 2+ STD 2 Inch
Taping Heads.
Press the LATCHING EMERGENCY STOP BUTTON.
a80f-NA
• To reduce the risk associated with sharp
blade hazards:
− Keep hands and fi ngers away from tape
cutoff blades under orange blade guards.
The blades are extremely sharp.
Figure 12-3

12.5 Box Size Adjustment

Repeat all the operations shown in
Section 11 - Set-Up and Adjustments.

12.6 Cleaning

Before carrying out any cleaning or maintenance
operation stop the machine by turning the main ro-
tary switch to OFFand disconnect the electric power
(Figure 12-3).
12.7 Table of Operation Adjustments -
Operator Qualifi cations
1 Tape loading and threading
2 Tape web alignment
3 Adjustment of one way tension roller
4 Adjustment to box size (H and W)
5 Top fl ap compression rollers
6 Adjustment of tape applying spring
7 Conveyor bed height adjustment
8 Special Adjustment-Changing tape leg length 2
9 Special Adjustment-Column re-positioning

12.8 Safety Devices Inspection

1 Taping units blade guard
2 Latching emergency stop button
3 STOP (OFF) turn rotary switch on main power
31
WARNING
2010 March
1
1
1
1
1
1
1
2