Canon MX860 Service Manual page 51

No. Name
(1) Test Print Service test print
(2) EEPROM EEPROM information print
(3) CD-R CD-R check pattern print
(4) LF / Eject LF / Eject correction pattern print See
(5) Left Margin Left margin pattern print
(6) Deep Cleaning Print head deep cleaning
(7) Main Main ink absorber counter
resetting
(8) Platen Platen ink absorber counter
resetting
(9) EEPROM Clear EEPROM initialization
(10) Panel Check Button and LCD test
(11) Set Destination Destination settings
(12) CD-R Correction CD / DVD print position
correction (X and Y direction)
(13) LF / EJECT LF / Eject correction value setting See
Correction
(14) Left Margin Left margin correction value
Correction setting
(15) Ink Absorber Ink absorber counter setting
Counter
(16) Wetting Liquid Wetting liquid counter setting
Counter
Function
Paper will feed from the rear tray.
Service test print:
- Model name
- ROM version
- Ink absorber counter value (ink amount in the ink absorber)
- USB serial number
- Destination
- EEPROM information
- Process inspection information
- Barcode (model name + destination)
- Ink system function check result
- CD / DVD sensor check result
The dialog box opens to select the paper source. Select Rear tray or
Cassette, and click OK.
EEPROM information print:
- Model name
- ROM version
- Ink absorber counter value (ink amount in the ink absorber)
- Print information
- Error information, etc.
Not used in servicing.
Not used.
Cleaning of both Black and Color at the same time
Set a sheet of A4 or Letter sized plain paper. After the ink absorber
counter is reset, the counter value is printed automatically.
Not used.
The following items are NOT initialized, and the shipment arrival flag is
not on:
- USB serial number
- Destination settings
- Record of ink absorber counter resetting and setting
- Record of repair at the production site
- LF / Eject correction values
- Left margin correction value
- Production site E-MIP correction value and enabling of it
- Endurance correction value and enabling of it
- Record of disabling the function to detect the remaining ink amount
- Ink absorber counter value (ink amount in the ink absorber)
See
Select the destination, and click Set.
ASA, AUS, BRA, CHN, CND, EUR, JPN, KOR, LTN, TWN, USA
Not used.
Not used.
See
Not used.
"LF / Eject Correction" below.
"Button and LCD Test" below.
"LF / Eject Correction" below.
"Ink Absorber Counter Setting" below.
48 / 64
Remarks