Canon MX860 Service Manual page 5

correction
Carriage rail
position
adjustment
LAN resetting
Wired / Wireless
LAN setting
information
display
FAX user data
N settings
N: New adjustment item
*1: Install the Service Tool version 1.030 or later to a pre-registered computer.
- The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor
unit.
- For print head alignment, perform manual print head alignment using plain paper.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
- At paper feed roller
replacement
- At logic board replacement
- At platen unit replacement
- At carriage unit replacement
- At carriage unit removal
- At logic board replacement
- At WLAN board
replacement
- At confirmation of the
network setting
- At logic board replacement
- At modular board
replacement
roller diameter).
To correct line feeding (eject
roller diameter).
To set the carriage rail to the
original position prior to
removal or replacement of the
carriage unit, put a mark on the
main chassis before removal of
the carriage unit.
To initialize the network
setting.
To confirm the network
setting.
To confirm the FAX user data
settings.
2 / 64
Perform in the service (LF
mode. correction
and Eject
correction
*1
Service Tool
is
Perform in the service
performed
mode.
at the same
time.)
None. 1 min.
None. 1 min.
Perform in the user
mode.
- Machine buttons
- Computer (IJ
Network Tool)
None. 1 min.
Perform in the user
mode.
- Machine buttons
- Computer (IJ
Network Tool)
None. 2 min.
Perform in the user
mode.