Set The Operation Stop Signal Input Mode - Yamato IN604W Instruction Manual

Set the Operation Stop Signal Input Mode

Select the item in function menu
1
 Check that the power in turned on.
Stop signal
Select mode
2
Stop signal
Stop signal
Set operation stop signal input mode
3
Stop signal
FUNCTION
OFF
TROUBLE
ENTER
CANCEL
OFF
↓
ON
ON
TROUBLE
ENTER CANCEL
① Press the FUNCTION key. The function menu
starts and the Sub Display displays the items.
Select the item using the FUNCTION key.
② Display the "Stop signal" and press the ENTER
key.
 Press the CANCEL key to cancel the function menu.
① The " " (cursor) goes out and the mode currently
selected blinks instead.
"OFF" using the "▼▲".
① Press the ENTER key.
signal input mode is decided and the function
menu selection screen is displayed.
 The unit monitors the input of operation stop signal
during operation in each mode and automatically
stops operation if it is input when the operation
stop signal input mode is set to "ON". The unit
enters to the standby state.
39
Operation Method
Display the "ON" or
The operation stop