Program Operation - Yamato IN604W Instruction Manual

Program Operation

As shown in the figure, this mode is used for running the device under the setting program.
Start pv
(Temperature)
Start program
Setting of the Program Operation
Turn on the power
1
 Program registration using PROGRAM key is necessary before starting program operation.
Select operation mode
2
Step1 Step2 Step3
POWER
MENU
Step4 Step5 Step6
 Turn on the power switch of the unit (earth leakage
breaker). Pressing the POWER key turns on the
power. The
temperature in furnace.
indicates "Standby" and the STANDBY lamp lights
on.
① Pressing the MENU key displays the operation
mode selection screen.
② The Sub Display on the operation mode selection
screen displays the name of operation mode
currently selected
corresponding operation mode lamp blinks at the
same time.
③ Keep pressing the MENU key until the program
operation mode is displayed.
④ Press the ENTER key. The program operation
mode is decided.
 The fixed temperature operation is selected at the
initial setting of unit. The operation mode carried
out last is selected in case other than it.
22
Operation Method
Setting
temperature
Step7 Step8
(Time)
End program
Main Display indicates
The Sub Display
with blinking.
the
The