Set The Operation Start Signal Input Mode - Yamato IN602CS Instruction Manual

Set the Operation Start Signal Input Mode

1 Select the item in function menu
• Check that the power in turned on.
OPR signal
2 Select mode
OPR signal
OPR signal
3 Set operation start signal input mode
OPR signal
FIXED TEMP
AUTO STOP
AUTO START
PROGRAM
STANDBY
END
HEATER
FUNCTION PROGRAM
REFRIGE
Start operation
4
FUNCTION
OFF
TROUBLE
ENTER CANCEL
OFF
↓
ON
ON
TROUBLE
ENTER
CANCEL
Set TEMP 37.0 ℃
℃
Wait: OPR signal
TROUBLE
MENU ENTER
CANCEL
① Press the FUNCTION key. The function menu
starts and the Sub Display displays the items.
Select the item using the FUNCTION key.
② Display the "OPR signal" and press the ENTER
key.
Press the CANCEL key to cancel the function menu.
① The " " (cursor) goes out and the mode c
selected blinks instead.
"OFF" using the "▼▲".
① Press the ENTER key.
signal input mode is decided and the function
menu selection screen is displayed.
• The unit is in the operation start signal input wait
state at the operation start in each mode when the
operation start signal input mode is set to on.
• In the state above, the lamp of current operation
lights on and the STANDBY lamp blinks.
lower column of the Sub Display indicates "Wait:
OPR signal".
DEFROST
POWER
① The unit starts operation when operation start
signal is input or the operation start signal input
mode is set to "OFF".
39
Operation Method
urrently
Display the "ON" or
The operation start
The