Table of Contents
Advertisement
Auto Start Operation
Set temperature and start wait period/time
3
Start operation
4
① The
setting
temperature
displayed.
The Sub Display indicates "Set
TEMP" and the numeric character that indicates
temperature blinks.
② Set the temperature using the "▲▼".
③ Press the ENTER key to decide the temperature.
④ The operation start wait period/time input screen
is displayed after the setting temperature is
decided.
Display the operation start wait period/time using
the "▲▼".
Input the operation start wait period when the
setting of timer mode shows "Time". Input the
operation start time when it shows "Clock".
Wait ST
30min
Auto-start OPR
(Operation start wait
period edition screen)
The display style of operation start wait period
varies depending on the range of time to be
displayed.
Time Range
0minute to 59minutes
1hour to
99hours59minutes
The input range of operation start time is always
from 0:00 to 23:59.
Pressing the CANCEL key quit the setting of auto
start operation.
① Press the ENTER key to decide the operation
start wait period/time. The unit enters to auto
start operation wait state.
START lamp lights on and the STANDBY lamp
blinks instead in this state.
displays the setting temperature and residual
time to operation start.
② The operation starts when the residual time
counts zero. The STANDBY lamp lights off and
the Sub Display displays the same subject as in
the
fixed
temperature
operation starts.
③ Press the POWER key to cancel or quit the wait
state.
21
Operation Method
input
screen
Start Time
13:00
Auto-start OPR
(Operation start time
edition screen)
Indication
0min to 59min
1h00m to 99h59m
The blinking AUTO
The Sub Display
operation
after
is
the
Advertisement
Table of Contents
