Replacing Method of Fluorescent (with Drip-proof)
Fluorescent
1. Turn OFF the ground fault interrupter.
2. Loosen the threaded socket, and shift it with packing. (Refer to ① in the figure.)
3. Press the fluorescent against either left or right end, and remove it. (Refer to ② in the figure.)
4. Set the packing and socket to the fluorescent to be replaced, and attach the fluorescent.
(Note: Insert the pin of the fluorescent into the small hole.)
For any questions, contact the dealer who you purchased this unit from, or the nearest sales
division in our company.
①
Maintenance Method
②
53
①
Packing
Socket