Starting Kernel With Ramdisk Using Fat16 Partition - SMART Embedded Computing COMX-P2020 BSP User Manual

Hide thumbs Also See for COMX-P2020 BSP:

Table of Contents

Start Linux

Welcome to the LTIB Embedded Linux Environment

!!!!! WARNING !!!!!!!

The default password for the root account is: root

please change this password using the 'passwd' command

and then edit this message (/etc/issue) to remove this message

COMX-P2020 login: root

Password:

[root@COMX-P2020 root]#

6.4.3

Starting Kernel with Ramdisk Using FAT16 Partition

By default, the SD Card will contain FAT16 partition on partition 1, as shown in the above

table.

To boot from this FAT16 partition, execute the following command:

=> run sdfatboot

Device: FSL_ESDHC

Manufacturer ID: 1b

OEM: 534d

Name: 00000

Tran Speed: 25000000

Rd Block Len: 512

SD version 2.0

High Capacity: No

Capacity: 2002780160

Bus Width: 4-bit

reading uImage

3416506 bytes read

reading comx.dtb

9824 bytes read

reading rootfs-dev.ext2.img

COMX-P2020 BSP User Guide (6806800L84C)

Table of Contents

Do you have a question about the COMX-P2020 BSP and is the answer not in the manual?