Bsp Build Environment; Build U-Boot; About U-Boot; U-Boot For Comx-P2020 - SMART Embedded Computing COMX-P2020 BSP User Manual
Hide thumbs
Also See for COMX-P2020 BSP:
- Installation and use manual (92 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
BSP Build Environment
4.1
Build U-boot
4.1.1
About U-boot
The \"U-Boot\" Universal Bootloader project provides firmware with full source code under
GPL. Many CPU architectures are supported: PowerPC (MPC5xx, MPC8xx, MPC82xx,
MPC7xx, MPC74xx, 4xx), ARM (ARM7, ARM9, StrongARM, Xscale), MIPS (4Kc, 5Kc),
x86, etc.
4.1.2
U-boot for COMX-P2020
Since the U-boot has supported a range of CPU architectures including PowerPC
(MPC5xx, MPC8xx, MPC82xx, MPC7xx, MPC74xx, 4xx, QorIQ) while P2020 is a base-on-
supported-QorIQ processor, it is possible, as well as useful, to provide the U-boot firmware
as the COMX-P2020 bootloader.
COMX-P2020 only supports starting-up U-boot from SPI Flash and SD Card.
COMX-P2020 BSP User Guide (6806800L84C)
Chapter 4
23
Advertisement
Table of Contents
Need help?
Do you have a question about the COMX-P2020 BSP and is the answer not in the manual?