Figure 3-1Bsp Source Code Directory Tree - SMART Embedded Computing COMX-P2020 BSP User Manual

Get and Install the ToolKit and BSP
3. BSP Source Code Directory Overview
When the BSP source code has been uncompressed, then the BSP directory tree can
be checked as below:

Figure 3-1BSP Source Code Directory Tree

 ~/ p2020 is the BSP Directory, which includes all the source code, Makefile and
configuration of Linux Kernel, Linux file system and U-boot.
 ~/p2020/linux/fs is the Linux file system directory, which can be used to compile
various file system, such as RAMDISK, Inflated file system tar ball and NFS file
system tar ball.
 ~/p2020/linux/kernel is the Linux kernel directory, which can be used to configure
and compile Linux Kernel.
 ~/u-boot is the U-boot directory, which can be used to compile the U-boot for
COMX-P2020.
4. Run "make" at the COMX-P2020 BSP directory to see the help information.
[percy@localhost p2020]$ make
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Emerson BlackAdder - P2020 Build
If you are creating a new release, the appropriate
version numbers must be updated in the following files:
versions
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Normal Usage Targets:
20
Get and Install the ToolKit and BSP
COMX-P2020 BSP User Guide (6806800L84C)