Starting The Kernel With Ramdisk Using Ext2 Partition - SMART Embedded Computing COMX-P2020 BSP User Manual

Data Size:
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02000000 ...
Image Name:
Created:
Image Type:
Data Size:
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
Booting using the fdt blob at 0xc00000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 2fcb0000, end 2fffffce ... OK
......
!!!!! WARNING !!!!!!!
The default password for the root account is: root
please change this password using the 'passwd' command
and then edit this message (/etc/issue) to remove this message
COMX-P2020 login: root
Password:
[root@COMX-P2020 /root]#
6.3.4

Starting the Kernel with Ramdisk using ext2 Partition

By default the USB stick will contain ext2 partition on partition 4, as shown in the above
table.
To boot from the partition 4, execute the following command:
COMX-P2020 BSP User Guide (6806800L84C)
3416412 Bytes =
COMX ext2 ramdisk rootfs
2010-09-28
PowerPC Linux RAMDisk Image (gzip compressed)
3473358 Bytes =
Welcome to the LTIB Embedded Linux Environment
3.3 MB
2:22:47 UTC
3.3 MB
Start Linux
81