Build Release Package For Comx-P2020 - SMART Embedded Computing COMX-P2020 BSP User Manual

[percy@localhost p2020]$
2. If successful, the rootfs-nfs.tar.gz can be found at the output directory:
[percy@localhost p2020]$ ls -al /local/tftpboot/COMX-
P2020/current/rootfs-nfs.tar.gz
-rw-r--r-- 1 percy percy 200279316 Dec 13 11:50
/local/tftpboot/COMX-P2020/current/rootfs-nfs.tar.gz
[percy@localhost p2020]$
4.3.6

Build release package for COMX-P2020

1. The release package of COMX-P2020 includes not only COMX-P2020.bsp.tar.gz, but
also the 4M U-boot Image for SPI flash which will be used at factory to program the SPI
flash. Before building the release package, make sure that all the above BSP targets
should be build in advance.
[percy@localhost p2020]$ make release
./make_spi_image.sh /local/tftpboot/COMX-P2020/current
4+0 records in
4+0 records out
4194304 bytes (4.2 MB) copied, 0.0185468 seconds, 226 MB/s
1026+0 records in
1026+0 records out
525312 bytes (525 kB) copied, 0.0113922 seconds, 46.1 MB/s
/local/tftpboot/COMX-P2020/current/u-boot.bin create OK.
./make_bsp_package.sh /local/tftpboot/COMX-P2020/current
cp: cannot create regular file `/local/tftpboot/COMX-
P2020/current/./make_sd.sh': Permission denied
make_sd.sh
u-boot-spi.bin
u-boot-sd.bin
comx.dtb
uImage
rootfs-LRFS.tar.gz
rootfs-nfs.tar.gz
rootfs-dev.ext2.img
make: *** [release] Interrupt
[percy@localhost p2020]$ make release
COMX-P2020 BSP User Guide (6806800L84C)
BSP Build Environment
37