SMART Embedded Computing COMX-P2020 BSP User Manual page 21

all..................... build all BSP targets
release................. build release package based on compiled
BSP targets
clean................... clean all the BSP targets and release
package
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Targets: u-boot
uboot-spi .............. config and build u-boot-spi.bin for SPI
flash
uboot-sd ............... config and build u-boot-sd.bin for SD
Card
uboot-clean............. clean the u-boot
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Targets: kernel
config-default.......... config the kernel with default
configuration
kernel-config........... config the kernel with current
configuration
kernel.................. compile kernel with current
configuration
kernel-clean............ clean the kernel
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Targets: device tree
dtb..................... compile device tree binary
dtb-clean............... clean the device tree binary
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Targets: rootfs
rootfs-help............. Help to add specific files and
directories to rootfs
rootfs-min-ext2......... build min ext2
rootfs-usr-ext2......... build usr ext2
rootfs-dev-ext2......... build dev ext2
rootfs-dev-LRFS......... build dev ininflated ext2FS
rootfs-nfs.............. build dev rootfs for nfs
rootfs-clean............ clean the rootfs
++++++++++++++++++++++++++++++++++++++++++++++++++++++
current output dir = /home/percy/p2020/.
COMX-P2020 BSP User Guide (6806800L84C)
Get and Install the ToolKit and BSP
rootfs
rootfs
rootfs
21