Get And Install The Toolkit And Bsp; Getting And Installing The Toolkit; Getting And Installing The Bsp - SMART Embedded Computing COMX-P2020 BSP User Manual

Get and Install the ToolKit and BSP

3.1

Getting and Installing the ToolKit

The ToolKit is not provided. To get the ToolKit, follow the steps below:
1. It is strongly recommended for BSP users to contact NXP to get the LTIB for P2020RDB
(P2020-RDB - LTIB BSP ISO (DVD3)) which can be found at NXP's website
https://www.nxp.com/.
the toolkit for process of NXP's P2020. (If the file is deleted from the website, please
contact NXP).
2. The installation guide of the toolkit can be found at
\help\Documents\pdf\P2020RDB_BSP_UserManual.pdf of the iso file. Please refer to
Chapter 2: LTIB Basic in the P2020RDB_BSP_UserManual.pdf to install the toolkit.
Only after running ltib, can the toolkit be installed at the directory:/opt/freescale
3. After installing the toolkit, create a soft link for /opt/freescale:
[percy@localhost ~]$ cd /opt
[percy@localhost opt]$ sudo ln -s freescale freescale-p2020
or change the directory /opt/freescale to /opt/freescale-p2020:
[percy@localhost ~]$ sudo mv /opt/freescale /opt/freescale-p2020
3.2

Getting and Installing the BSP

1. Please contact SMART EC for the tar ball of BSP source file: COMX-2020.src.tar.gz
and copy it to the home directory of the user.
2. As a non-root user, uncompress the file COMX-P2020.src.tar.gz.
[percy@localhost ~]$ tar zxvf COMX-P2020.src.tar.gz
COMX-P2020 BSP User Guide (6806800L84C)
The package includes not only the BSP for P2020RDB, but also
Chapter 3
19