Build Rootfs-Lrfs.tar.gz - SMART Embedded Computing COMX-P2020 BSP User Manual

Load Address: 0x00000000
Entry Point: 0x00000000
+ echo done.
done.
cp
P2020/current/rootfs-dev.ext2.img
make[1]: Leaving directory `/home/percy/p2020/linux/fs'
[percy@localhost p2020]$
2. If successful, the rootfs-dev-ext2.img can be found at the output directory:
[percy@localhost p2020]$ ls -al /local/tftpboot/COMX-
P2020/current/rootfs-dev.ext2.img
-rw-r--r-- 1 percy percy 110295751 Dec 13 11:45
/local/tftpboot/COMX-P2020/current/rootfs-dev.ext2.img
[percy@localhost p2020]$
4.3.4

Build rootfs-LRFS.tar.gz

1. To build rootfs-LRFS.tar.gz, run the command: "make rootfs-dev-LRFS" at p2020 BSP
directory:
[percy@localhost p2020]$ make rootfs-dev-LRFS
make -C linux/fs -f Makefile rootfs-dev-LRFS
make[1]: Entering directory `/home/percy/p2020/linux/fs'
rm -f /tmp/percy/rootfs_ext2_dev_LRFS.tar.gz /local/tftpboot/COMX-
P2020/current/rootfs-LRFS.tar.gz
./scripts/gen_rootfs_LRFS.sh dev
+ USAGE='Usage: ./scripts/gen_rootfs_LRFS.sh <min/usr/dev>'
+ '[' 1 -ne 1 ']'
......
+ echo done.
done.
cp
P2020/current/rootfs-LRFS.tar.gz
make[1]: Leaving directory `/home/percy/p2020/linux/fs'
[percy@localhost p2020]$
2. If successful, the rootfs-LRFS.tar.gz can be found at the output directory:
COMX-P2020 BSP User Guide (6806800L84C)
/tmp/percy/rootfs_ext2_dev.img /local/tftpboot/COMX-
/tmp/percy/rootfs_ext2_dev_LRFS.tar.gz /local/tftpboot/COMX-
BSP Build Environment
35