SMART Embedded Computing COMX-P2020 BSP User Manual page 41

[percy@localhost current]$ sudo chmod 777 /local/tftpboot/COMX-
P2020/current
[percy@localhost current]$ ls -al COMX-P2020.bsp.tar.gz
-rwxr--r-- 1 percy percy 462501957 Dec
P2020.bsp.tar.gz
 Extract all the BSP targets from the COMX-P2020.bsp.tar.gz:[percy@localhost
current]$ tar zxvf COMX-P2020.bsp.tar.gz
[percy@localhost current]$ ls -al
total 910224
drwxr-xr-x 2 percy percy
drwxrwxr-x 8 percy percy
-rw-r--r-- 1 percy percy
-rwxr--r-- 1 percy percy 462501957 Dec
P2020.bsp.tar.gz
-r-xr-xr-x 1 percy percy
-rw-r--r-- 1 percy percy 110443332 Dec 9 14:53 rootfs-dev.ext2.img
-rw-r--r-- 1 percy percy 107400408 Dec 9 14:54 rootfs-LRFS.tar.gz
-rw-r--r-- 1 percy percy
-rw-r--r-- 1 percy percy 200253398 Dec
-rw-r--r-- 1 percy percy 42137827 Dec 9 14:51 rootfs-usr.ext2.img
-rwxr-xr-x 1 percy percy
-rw-r--r-- 1 percy percy
-rw-r--r-- 1 percy percy
 Insert the MicroSD to a USB reader, and connect the USB reader to the host.
 Check the device name for the USB reader. The following command shows that
the device name for USB reader is /dev/sdb.
[percy@localhost current]$ ls -al /dev/sd*
brw-r----- 1 root disk 8, 0 Dec
brw-r----- 1 root disk 8, 1 Dec
brw-r----- 1 root disk 8, 2 Dec
brw-r----- 1 root disk 8, 16 Dec
[percy@localhost current]$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 2002 MB, 2002780160 bytes
62 heads, 62 sectors/track, 1017 cylinders
Units = cylinders of 3844 * 512 = 1968128 bytes
Device Boot
COMX-P2020 BSP User Guide (6806800L84C)
4096 Dec 10 09:37 .
4096 Dec
9824 Dec
5771 Dec
3872536 Dec 9 14:51 rootfs-min.ext2.img
524288 Dec
525312 Dec
3416506 Dec
2 17:16 /dev/sda
2 17:17 /dev/sda1
2 17:16 /dev/sda2
2 18:43 /dev/sdb
Start End
U-boot Deployment
9 14:57 COMX-
9 18:07 ..
9 14:51 comx.dtb
9 14:57 COMX-
9 12:57 make_sd.sh
9 14:55 rootfs-nfs.tar.gz
9 14:40 u-boot-sd.bin
9 14:39 u-boot-spi.bin
9 14:51 uImage
Blocks Id System
41