Table of Contents
Advertisement
Performing hardware maintenance and mechanical assembly
What is next?
Review the procedures for installing the server and conducting diagnostic tests.
Replacing the software feature key
Introduction
The software feature key (dongle) stores the unique serial number of the server. If the 201i
server must be replaced, use this procedure to move the software feature key from the faulty
server to the replacement server.
Equipment required
The following equipment is required for this procedure:
• flat blade screwdriver
• tweezers
Before you begin
Before you replace the hard drive, review the following:
•
Removing the server from the switch
• the
201i server component diagram: exploded view
To replace the software feature key
1. Use the flat blade of the screwdriver to lift the clip that secures the software feature
108
Avaya CallPilot® 201i Server Maintenance and Diagnostics
key to the motherboard.
on page 92
on page 94
December 2010
Advertisement
Table of Contents
Troubleshooting
