Emc; Interfaces - Rexroth Indramat SYSTEM200 Project Planning Manual

4-2
Technical Data
4.5

EMC

Emitted interference according to EN 55022
Noise immunity according to IEC 61000-4-2 (ESD)
Noise immunity according to IEC 61000-4-4 (burst)
Noise immunity according to IEC 61000-5-5 (surge)
4.6

Interfaces

Programming interface (PROG)
General serial interface (COM)
BT bus
Optional interfaces
1 Bb – Relay (ready for operation)
(system monitoring)
Class A (industrial environment)
Assessment criterion B
Assessment criterion B
Assessment criterion B
RS232/RS422/RS485 (D-SUB, 15 pins, female connector)
RS232/RS422/RS485 (D-SUB, 15 pins, female connector)
Rexroth BT bus (D-SUB, 9 pins, female connector)
INTERBUS (D-SUB, 9 pins, female connector)
PROFIBUS DP (D-SUB, 9 pins, female connector)
DeviceNet (COMBICON, 5 pins, male connector)
2 x RS232 and 2 x RS422/485 (D-SUB, 9 pins, male connector)
NO contact
V = 24 VDC, I = 150 mA
n max
min. 500 000 switching cycles (overcurrent-protected)
RECO PLC ISP200-R/G2
DOK-CONTRL-MTS-R0*.2G2-PR01-EN-P