Before Installing The Appliance - Miele K 32223 i Operating And Installation Instructions

Installation
Weight of the furniture door

If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent
functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
K 32222 i, K 32223 i
K 32242 iF, K 32243 iF
K 33222 i
K 34222 i, K 34223 i
K 34242 iF, K 34243 iF
Fitting large or divided furniture
doors
When fitting large or divided furniture
doors an extra fitting kit or set of fixing
brackets should be used. These are
available to order from Miele.
54
Maximum
weight of
furniture door
in kg
17
17
17
17
17

Before installing the appliance

 Take the accessory pack which
includes installation parts and other
accessories out of the appliance and
remove the packaging strap holding
the door in place.
 Do not remove the following from
the back of the appliance:
– The spacers (depending on model)
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model)
located inside the metal grille (heat
exchanger).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
 Remove the cable clip from the back
of the appliance.