Before Installing The Appliance - Miele KFN 37432 iD Operating And Installation Instructions

Installation
Weight of the furniture door

If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent
functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
KFN 37432 iD,
KFNS 37432 iD
When fitting large or divided furniture
doors, an extra fitting kit or set of
fixing brackets should be used. These
are available to order from the Miele
Customer Service department or
dealers.
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door will now be fitted to the
appliance door. All the necessary
parts are supplied or can be ordered
from the Miele Customer Service
Department.
80
Upper Lower
door in door in
kg kg
17 12

Before installing the appliance

 Take the accessory pack which
includes installation parts and other
accessories out of the appliance and
remove the packaging strap holding
the door in place.
 Do not remove the following from
the back of the appliance:
– The spacers (depending on model)
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model)
located inside the metal grille (heat
exchanger).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
 Remove the cable clip from the back
of the appliance.