RAM 1500 2020 Owner's Manual page 62

60 GETTING TO KNOW YOUR VEHICLE
NOTE:
Icons and descriptions can vary based upon vehicle equipment.
Icon
MAX A/C
Press and release to change the current setting. The indicator illuminates when MAX A/C is on. Performing this function
again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off.
NOTE:
The MAX A/C button is only available on the touchscreen.
Faceplate A/C Button
A/C Button
Press and release the button on the touchscreen, or push and release the button on the faceplate, to change the current
Touchscreen A/C
setting. The indicator illuminates when A/C is on.
Button
Recirculation Button
Press and release this button to change the system between recirculation mode and outside air mode. The Recirculation
indicator and the A/C indicator illuminate when Recirculation mode is turned on. Recirculation can be used when outside
conditions such as smoke, odors, dust, or high humidity are present. Recirculation can be used in all modes. Recirculation
may be unavailable (button on the touchscreen greyed out) if conditions exist that could create fogging on the inside of the
windshield. The A/C can be deselected manually without disturbing the mode control selection. Continuous use of the
Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recom-
mended.
Description