RAM 1500 2020 Owner's Manual page 17

To Lock The Doors And Tailgate
Push and release the lock button on the key fob
to lock all doors, the tailgate, and the RamBox
(if equipped). The turn signal lights will flash and
the horn will chirp to acknowledge the signal.
Sound Horn With Remote Key Lock
This feature will cause the horn to chirp when
the doors are locked with the key fob. This
feature can be turned on or turned off.
NOTE:
Pushing the lock button on the key fob while you
are in the vehicle will activate the vehicle secu-
rity alarm system. Opening a door with the
vehicle security alarm system activated will
cause the alarm to sound. Push the unlock
button to deactivate the vehicle security alarm
system.
Refer to "Instrument Cluster Display" in
"Getting To Know Your Instrument Panel" for
further information.
Using The Panic Alarm
To turn the Panic Alarm feature on or off, push
the Panic button on the key fob. When the Panic
Alarm is activated, the turn signals will flash, the
horn will pulse on and off, and the interior lights
will turn on.
The Panic Alarm will stay on for three minutes
unless you turn it off by either pushing the Panic
button a second time or drive the vehicle at a
speed of 15 mph (24 km/h) or greater.
NOTE:
The interior lights will turn off if you place the

ignition in the ACC or ON/RUN position while
the Panic Alarm is activated. However, the
exterior lights and horn will remain on.
You may need to be less than 35 ft (11 m)

from the vehicle when using the key fob to
turn off the Panic Alarm due to the radio
frequency noises emitted by the system.
GETTING TO KNOW YOUR VEHICLE
Air Suspension (Remote Lowering Of The
Vehicle) — If Equipped
For easy entry and loading, your
vehicle can be lowered by pushing the
key fob air suspension lowering
button two times. When key fob
lowering is requested, the vehicle will send a
series of chirps and flashes to alert the
customer that the operation has begun and will
continue these alerts until it successfully
lowers.
The following conditions must be met for the
vehicle to lower remotely:
The vehicle must not already be in Entry/Exit

(Park) ride height.
The vehicle battery must be fully charged.

All doors must be closed.

The key fob must be out of the vehicle.

NOTE:
Ensure the vehicle is clear of all objects, pets,
and people prior to remote lowering.
15
2