RAM 1500 2020 Owner's Manual page 289

While the "rear view" is displayed, and if
enabled, active guidelines are overlaid on the
image to illustrate the width of the vehicle,
including the side view mirrors and its projected
backup path based on the steering wheel
position.
Different colored zones indicate the distance to
the rear of the vehicle.
The following table shows the approximate
distances for each zone:
Distance To The Rear
Zone
Of The Vehicle
Red 0 - 1 ft (0 - 30 cm)
1 ft - 6.5 ft
Yellow
(30 cm - 2 m)
6.5 ft or greater
Green
(2 m or greater)
Modes Of Operation
Standard Backup Camera view can be manually
activated by selecting "Backup Camera"
through the Controls menu within the Uconnect
screen.
Refer to "Parkview Rear Back Up Camera — If
Equipped" in this chapter for more information
on activation conditions.
Top View
The Top view will show in the Uconnect System
with Rear View and Front View in a split view
display. There is integrated ParkSense arcs in
the image at the front and rear of the vehicle.
The arcs will change color from yellow to red
corresponding the distance zones to the
oncoming object.
ParkSense Camera View
STARTING AND OPERATING
NOTE:
Front tires will be in image when the tires are

turned.
Due to wide angle cameras in mirror, the

image will appear distorted.
Top view will show which doors are open.

Open front doors will remove outside image.

Rear View
This is the Default view of the system
in REVERSE and is always paired with
the Top view of the vehicle with
optional active guidelines for the
projected path when enabled.
Rear Cross Path View
Pressing the Rear Cross Path soft key
will give the driver a wider angle view
of the rear camera system. The Top
view will be disabled when this is
selected.
Front View
The Front view will show you what is
immediately in front of the vehicle
and is always paired with the Top view
of the vehicle.
287
5