RAM 1500 2020 Owner's Manual page 325

CAUTION!
Do not contaminate the bulb glass by

touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened
bulb life will result.
Always use the correct bulb size and type

for replacement. An incorrect bulb size or
type may overheat and cause damage to
the lamp, the bulb socket, or the lamp
wiring.
6. Rotate the bulb counterclockwise a quarter
turn to unlock the bulb from the lamp.
7. Pull the bulb straight out from the housing.
8. Reverse the procedure for installation of
new bulb and covers.
High Beam
1. Open the hood.
2. Disconnect and isolate the negative battery
cable.
3. Look under the hood and behind the
headlamp to find the high beam bulb
access cover.
Driver's High Beam Headlight Cover
NOTE:
It may be necessary to remove/reposition Air
Cleaner Assembly to access passenger side
headlamp/side marker light bulbs.
4. Reach behind the headlamp and disengage
the access cover by rotating counter-
clockwise.
IN CASE OF EMERGENCY
5. Disconnect the internal lamp wiring harness
connector from the high beam bulb.
CAUTION!
Do not contaminate the bulb glass by

touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened
bulb life will result.
Always use the correct bulb size and type

for replacement. An incorrect bulb size or
type may overheat and cause damage to
the lamp, the bulb socket, or the lamp
wiring.
6. Rotate the bulb counterclockwise a quarter
turn to unlock the bulb from the lamp.
7. Pull the bulb straight out from the housing.
8. Reverse the procedure for installation of
new bulb and covers.
323
6