RAM 1500 2020 Owner's Manual page 194

192 SAFETY
What is the weight limit (child's weight + weight of the
child restraint) for using the LATCH anchorage system to
attach the child restraint?
Can the LATCH anchorages and the seat belt be used
together to attach a rear-facing or forward-facing child
restraint?
Can a child seat be installed in the center position using
the inner LATCH lower anchorages from the outboard
seating positions?
Can two child restraints be attached using a common
lower LATCH anchorage?
Can the rear-facing child restraint touch the back of the
front passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
Use the LATCH anchorage system until the combined
weight of the child and the child restraint is 65 lbs
65 lbs (29.5 kg) (29.5 kg). Use the seat belt and tether anchor instead
of the LATCH system once the combined weight is more
than 65 lbs (29.5 kg).
Do not use the seat belt when you use the LATCH
anchorage system to attach a rear-facing or forward-fac-
ing child restraint.
No
Booster seats may be attached to the LATCH anchor-
ages if allowed by the booster seat manufacturer. See
your booster seat owner's manual for more information.
Quad Cab or Crew with Full bench rear seat: Use the
No seat belt and tether anchor to install a child seat in the
center seating position
Never "share" a LATCH anchorage with two or more
child restraints. If the center position does not have
dedicated LATCH lower anchorages, use the seat belt to
No
install a child seat in the center position next to a child
seat using the LATCH anchorages in an outboard posi-
tion.
The child seat may touch the back of the front passen-
ger seat if the child restraint manufacturer also allows
Yes
contact. See your child restraint owner's manual for
more information.
No