Overview; Key Features - Texas Instruments TMS320C5545 BoosterPack Hardware User's Manual

This user's guide supports the C5545 BoosterPack™, which was designed and developed by Mistral
Solutions Pvt. Ltd. for Texas Instruments, Inc.
1

Overview

This section provides an overview of the C5545 BoosterPack along with the key features, functional block
diagram and basic operation.
1.1

Key Features

The C5545 BoosterPack is a high performance, low-power platform that enables users to evaluate and
develop for the TMS320C5545A processor and its peripherals. The BoosterPack interfaces to
LaunchPad™ boards such as MSP432, CC3200, MSP430™ LaunchPads, as well as compatible
BoosterPacks.
The key features of C5545 BoosterPack are:
• The C5545 fixed-point DSP based on TI's C55x architecture
• The CC2650 2.4 GHz multi-standard wireless MCU
– Used as wireless communication companion with C5545 DSP
• 2.4 GHz single ended PCB antenna
• 16M-bit SPI FLASH
• Micro-SD card slot with 8GB card
• OLED display (passive matrix, 96 x 16 pixels, monochrome display)
• Audio CODEC (TLV320AIC3206IRSBT)
• Micro USB connector
• Three user switches and three user LEDs
• One reset switch and two power LEDs
• FTDI chip FT2232HL for JTAG and UART over micro USB connector
• 10-pin JTAG for CC2650 (1.8 V only)
• Audio line-in (MIC) and headphone out
• On-board microphone (CMC-2242PBL-A)
• LaunchPad connectors
• INA current monitors (INA219AIDCNR)
• Powered by USB or LaunchPad
• On-board, XDS100 JTAG emulator for C5545
BoosterPack, LaunchPad, MSP430, SimpleLink, Code Composer Studio are trademarks of Texas Instruments.
ARM, Cortex are registered trademarks of ARM Limited.
Bluetooth is a trademark of Bluetooth SIG, Inc.
ZigBee is a registered trademark of ZigBee Alliance.
All other trademarks are the property of their respective owners.
SPRUI90 – September 2016
Submit Documentation Feedback
TMS320C5545 BoosterPack Hardware
Copyright © 2016, Texas Instruments Incorporated
User's Guide
SPRUI90 – September 2016
TMS320C5545 BoosterPack Hardware
5