Table of Contents
Advertisement
Introduction to C5545 BoosterPack Board
2.1
XDS100 On Board Emulator Interface
The C5545 BoosterPack contains an on-board XDS100 USB emulator based on the FTDI FT2232 dual
port chip. One of the FT2232 ports is configured for UART and the other for JTAG.
All the JTAG lines are connected to C5545 through level translator because FT2232 operates at 3.3 V I/O.
The EEPROM (1Kb) is interfaced to the FT2232 to store configuration data. The XDS100 does not
interface with or support the CC2650.
12
TMS320C5545 BoosterPack Hardware
Figure 4. JTAG Interface
Copyright © 2016, Texas Instruments Incorporated
www.ti.com
SPRUI90 – September 2016
Submit Documentation Feedback
Advertisement
Table of Contents
Need help?
Do you have a question about the TMS320C5545 BoosterPack and is the answer not in the manual?