E Mail S Ettings; S Ending A T Est E Mail M Essage - Promise Technology Vess A7000 Series Product Manual

Vess A7000 Series Storage Appliance for Video Surveillance
e s
mAil ettings
To change Email service settings:
1. Click the Administrative Tools icon.
2. Click the Software Management icon.
3. Click on Email in the Service List of the Service Management menu.
4. Make settings changes as required:
Under Service Setting -- Email choose a startup type:
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
Under Email Server Settings
• SMTP Server IP address
• SMTP Authentication under Email Server Settings
The Yes option enables authentication.
The No option disables.
• SMTP Authentication under Email Server Settings
Username – Required if SMTP authentication is enabled.
SMTP Authentication Password – Required if SMTP authentication is enabled.
Under Email Content Customization
• Email Sender (From) Address – The sender's name shown on notification messages.
• Email Subject – The subject line of the notification message.
5. Click the Submit button.
6. Click the Confirm button.
s A t e
enDing est
After email settings are completed, you can send a test email.
To send a test email message, complete email settings as described above and check the Send a test email
option box, then click the Submit button. A test email message is sent to the address you specified.
m
mAil essAge
58
Managing with the Web Manager