Operation; Retrofitting - DAL-BO Maxiroll 1030 2008 Manual

Table of Contents

Advertisement

Operation

The crackerboard is a flexible unit with a range of uses. At depth setting of
approx. 5cm, the vibrating effect of the teeth will crush clumps.
Its function is not as a dozer blade, but to break the soil down. As each tooth
can move individually and thus yield to local pressure, the crackerboard is
easy to use and requires little adjustment compared to a levelling board.
The board sections can run at different depths which means it may be neces-
sary to reset the board by raising it to full height.

Retrofitting

The crackerboard can be factory-fitted, or supplied at a later date if required.
A crane or other lifting device will be required for retrofitting.
Page 22
A deeper setting will increase the
levelling effect to that of a levelling
board, as a small bank of soil builds
up in front of the teeth.
1 Maxiroll unfolded.
2 Mid-section
flanges (A).
Maxiroll 2008
Fig. 15
Fig. 16
mounted
on
A
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxiroll 1230 2008

Table of Contents