Connecting
Remember to secure towbar pin with split pin or the like.
Hydraulics
Maxiroll requires a standard double-acting hydraulic outlet with flow setting.
One of the double-acting outlets is for unfolding the side sections and the oth-
er for raising/lowering the roller.
Table 1. Hose markings
Flow setting is required for both double-acting outlets.
Check hydraulic hoses for crimping
Disconnection
Fit leg, remove towing pin and disconnect hydraulic hoses.
Remember to depressurise hoses before disconnecting them.
Maxiroll must be in transport or working position when disconnecting.
Page 12
Connecting and disconnecting
Connect roller to the tractor's fixed
towbar, where drawbar (A) must fit
between the towbar forks.
Insert pin and remove leg.
Cylinder name
Colour Outlet
Raise/lower cylinder White
Fold/
Red
weight equalisation
Suspension
Blue
Maxiroll 2008
Fig.2
Double acting
Double acting
Single acting
A
Function
Raises Maxiroll up onto its wheels
and down into working position.
Folds side sections up/out and acts
as weight equalisation from mid-
section to side sections.
For suspension of pendulum frames
in conjunction with the accumula-
tors to absorb shock on the frames.