Table of Contents
Advertisement
Excessive pressure
Insufficient pressure
Page 18
Maxiroll 2008
3 The pressure for hydraulic suspension may need adjustment. It can al-
so be necessary to adjust pressure according to soil conditions.
1 If the cylinder does not move, pressure is too great. This can cause ex-
cessive strain on the frames.
2 Reduce pressure until the cylinder moves again.
1 Pressure is too low if the cylinder cannot extend fully.
(increase)
2 Adjust
We recommend running at a pressure of 70 bar!
But always operate according to conditions!
pressure until all 5 suspension cylinders extend.
Advertisement
Table of Contents
