Hose Markings; Adjusting Angle Of Teeth - DAL-BO Maxiroll 1030 2008 Manual

Hose markings

Table 4. Hose markings
Cylinder name
Depth adjustment Green

Adjusting angle of teeth

Crackerboard depth is hydraulically
adjustable. The angle of the teeth is
adjusted manually on the spindles
(A). To ensure uniform crackerboard
angle setting, there are numbers on
the sides of the spindles.
The angle set will be retained re-
gardless of depth, as the teeth are
mounted in a parallelogram.

Raise crackerboard to highest position for adjustment of teeth angle.
The angle of the teeth depends on the nature of the job. If they are set aggres-
sively while the depth is set for the upper soil layer, maximum vibration will
be created for fine-crushing of lumps. This setting is recommended for most
jobs.
If the teeth are more horizontal, it will allow them to avoid obstacles. It will
also mean that the tips of the teeth can move more in the vertical plane, leav-
ing an uneven field
Maxiroll 2008
Colour Outlet
 For an aggressive tooth (vertical) make the spindles shorter.
 For a passive tooth (horizontal) make the spindles longer.
Function
Double acting Adjust crackerboard depth.
Fig. 14
A
Page 21