Table of Contents
Advertisement
Fold up
If there is a crackerboard fitted, check it is fully raised before starting folding
(see "Accessories, Crackerboard, Operation")
1. Activate extend/retract cylinders
2 Activate
(marked: White) to full length. Roller
will lift from ground.
3. Activate extend/retract cylinders
to fold side sections in.
4. Activate raise/lower cylinder to
lower roller into transport bar. (See
fig. 5)
Maxiroll 2008
(marked: Red) to lift end of side
sections (A) a little.
raise/lower
Fig. 6
Fig. 7
cylinder
Fig. 8
Page 15
Advertisement
Table of Contents
