Operation; Working Depth; Operating Speed; Power - DAL-BO Ratoon Manual

Correct operation is vital for optimum use. This applies to working in the field
and for safety. Always ensure you are fully familiar with all safety aspects of
the machine.
Do not turn or reverse while the machine's tines are in the ground.

Working depth

The machine can be set for a very light effect. Depth can be controlled very
precisely by the tractor's hydraulic lift or by a combination of wheels or pack-
er roller. As such, it can be set for very light effect at a depth of only 25 cm
approx. Working at this depth will only lightly break up the soil. Never set
depth at more than 70 cm. Exceeding this setting can damage the machine.

Operating speed

An operating speed of 0-6 km/h is recommended, but always operate accord-
ing to conditions.
Increased speed will increase wear, particularly in dry conditions. The har-
rowing tines can also be damaged if operating at excessive speeds in unfa-
vourable conditions.

Power

Power requirement will depend on soil type, terrain and speed.
Page 16

Operation

Ensure machine works parallel to
ground when in operation.
Ratoon
Fig. 6