Table of Contents
Advertisement
3 Side sections mounted on
flanges (B).
4 Fit hydraulic cylinders.
5 Fit hoses on cylinders.
6 Secure hoses in hose holders
(C) and pass through holders
on drawbar. .
7 Tighten all fittings securely.
Connect board to tractor hy-
draulics.
Bleed system thoroughly to avoid injury to personnel. Extend depth adjust-
ment cylinders fully several times.
Locking set
A crackerboard locking set is available as an accessory to lock the teeth into
one long board in three sections. The crackerboard will then act more like a
levelling board
Mounting
The locking set is mounted on the
back of the teeth (see illustration)
using longer bolts on the wear parts.
The teeth are linked by an iron bar
(A), secured by pins (B).
Maxiroll 2008
Fig. 17
Fig. 18
Fig. 19
B
B
C
A
B
C
Page 23
Advertisement
Table of Contents
