Table of Contents
Advertisement
There are no specific transport position for the solid types (A), whereas the
hydraulic types (B) must be secured with a lock during transport.
Plate 3
A
Transport lock
∇
On the hydraulic types, where the side sections can be raised, the sections
must be secured during transport which will be done automatically when the
side sections are raised to top position. The driver of the tractor must make
sure that the hook (plate 4) is in mesh and hereby keep the side sections in
transport position.
Disengagement of the transport lock
Before the transport lock is disengaged, the loop (A) on the wire must be
hooked onto the ratchet (B).
Plate 4
Disengagement of the transport lock can be done safely from the tractor cab
by depressing the hydraulic actuating handle to the side sections and by press-
ing the side sections in full top position. Hereby, the hook is disengaged and
the side sections can be lowered. Simultaneously with the lowering of the side
sections, the loop (A) slips off the ratchet (B) and the hook (C) will again be
ready for locking the side sections in transport position.
∇
When opening the side sections, no persons must be in the implement's ra-
dius of action.
Extra weight must not be mounted on the Levelflex 2000, as the implement is
not dimensioned for that.
Levelflex 2000
Operation
B
C
B
A
side 7
Advertisement
Table of Contents
