Steps
1. Place the display hinge on the display assembly.
2. Replace the four (M2.5x3) screws to secure the display hinge to the display assembly.
Next steps
1. Install the
display
panel.
2. Install the
display hinge
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Display (eDP) cable
Removing display cable
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
86
Disassembly and reassembly
caps.
After working inside your
computer.
Before working inside your
computer.