Steps
1. Insert the camera into the slot on the display back cover .
2. Connect the camera cable to the connector and adhere the adhesive tape above the camera connector.
3. Affix the two conductive tape above the camera module.
Next steps
1. Install the
display
panel.
2. Install the
display hinge
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Display hinges
Removing display hinge
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display hinge
7. Remove the
display
panel.
About this task
The figure indicates the location of the camera and provides a visual representation of the removal procedure.
84
Disassembly and reassembly
caps.
After working inside your
computer.
Before working inside your
caps.
computer.