Steps
1. Align and place the inner frame into the slot on your computer.
2. Replace the six (M2x5) and six (M2x3) screws to secure the inner frame to the computer.
3. Route the WWAN and WLAN antenna cables through the retention clips on the frame.
4. Adhere the coin-cell battery to the inner frame.
Next steps
1. Install the
WLAN
card.
2. Install the
WWAN
card.
3. Install the
2280 SATA
SSD.
4. Install the battery.
5. Install the
base
cover.
6. Follow the procedure in
Heatsink assembly-discrete
Removing the heatsink assembly-discrete
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
inner
frame.
About this task
The figure indicates the location of the Heatsink and provides a visual representation of the removal procedure.
36
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.