Display Assembly; Removing The Display Assembly - Dell Latitude 5401 Service Manual

About this task
The figure indicates the location of the power button with fingerprint and provides a visual representation of the installation procedure.
Steps
1. Locate the power button with fingerprint slot on your computer.
2. Align and place the power button with fingerprint into the slot on your computer.
3. Install the two (M2x2) screws that secure the power button to the palmrest.
Next steps
1. Install the system board.
NOTE: System board can be installed with heatsink attached.
2. Install the DC-in.
3. Install the LED board.
4. Install the inner frame.
5. Install the memory.
6. Install the WLAN card.
7. Install the WWAN card.
8. Install the 2280 SATA SSD.
9. Install the battery.
10. Install the base cover.
11. Follow the procedure in

Display assembly

Removing the display assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the WLAN card.
5. Remove the WWAN card.
66 Disassembly and reassembly
After working inside your computer.
Before working inside your computer.